How to Change Your Car's Coolant and Select the Right Type for Your Vehicle

Welcome to Schindler's Garage, your trusted auto repair partner in Floyds Knobs, IN! Whether you're a seasoned driver or a newcomer to the world of automotive maintenance, understanding how to properly change your car's coolant and select the right type can significantly extend the life of your vehicle. Today, we're diving deep into this vital aspect of car care, so you can feel confident about handling one of the most important maintenance tasks yourself.



Understanding the Importance of Coolant in Your Vehicle

Coolant, also known as antifreeze, plays an essential role in your car’s health. It keeps the engine running at the optimal temperature by absorbing heat and preventing it from overheating, even under tough driving conditions. Additionally, coolant prevents the water in your engine’s cooling system from freezing in cold weather.

At Schindler's Garage in Floyds Knobs, we stress the importance of keeping your coolant fresh and filled to the appropriate levels, not just for the health of your engine but also to ensure your car operates efficiently year-round.

When to Change Your Coolant

The typical interval for changing coolant is every 30,000 to 60,000 miles, but this can vary depending on your vehicle’s make and model. Always refer to your owner’s manual for the manufacturer's recommended schedule. If you're unsure, we at Schindler's Garage are just a call or visit away to help you determine the right time for a change.

Step-by-Step Guide to Changing Your Car’s Coolant

1. Prepare Your Tools and Safety Gear: You will need coolant, a wrench, a funnel, a drain pan, and gloves. Safety goggles are also recommended to protect your eyes from potential splashes.

2. Allow Your Engine to Cool: Never work on a hot engine. Ensure your car has been off for at least an hour before starting this task.

3. Locate the Drain Plug: Find the radiator drain plug at the bottom of your radiator. Place your drain pan underneath.

4. Drain the Old Coolant: Open the drain plug and allow the old coolant to flow out completely. Dispose of the old coolant safely by bringing it to Schindler's Garage or a local recycling center that accepts hazardous materials.

5. Flush the System (if necessary): This is recommended to remove any residue or contaminants in the system. Use distilled water to fill the radiator, run the car with the heater on max for 10 minutes, then drain the water.

6. Refill with New Coolant: Close the drain plug and fill the radiator with new coolant. Make sure to use the type that’s recommended in your owner's manual.

7. Bleed the System: This removes any air pockets. Turn on your car, let it run for a few minutes, and check for leaks.

8. Check the Coolant Level: After the engine cools again, check the coolant level in the overflow tank and top it off if necessary.

Choosing the Right Coolant for Your Car

The type of coolant needed can vary widely by the make and model of your vehicle. Here’s how to ensure you choose the right type:

• Check Your Manual: This is your primary guide.
• Consider the Engine Type: Diesel and petrol engines can require different coolants.
• Look at Coolant Specifications: They’re usually indicated on the product label (e.g., OAT, HOAT, IAT).

Remember, using the wrong type of coolant can lead to inefficient cooling and even engine damage.

Why Choose Schindler's Garage for Your Coolant Needs?

At Schindler's Garage, located in the heart of Floyds Knobs, IN, we are committed to providing top-quality service and expert advice. Our team of skilled technicians is here to assist with all your coolant service needs, from selection to disposal.

Whether you're performing this service at home or prefer professional help, we're here to support you every step of the way.